This Joint A Pipe Unit with air strainer and hose clamp is typically found in the Left & Right Cover section of several part manuals. Commonly used for but not limited to 300cc and 330cc engines. It is most popularly known for its use in Linhai 300, Buyang 300 4x4 / FA-D300 / FA-H300 / FA-G300 / ZR300U-4X4 / Daymak Grunt 300 / Gio Bear 300 / Midwest 300cc / ZMC Titan 300 / Pioneer 300cc, Quadzilla 325 4x4, Atomik Krusher 300cc 2WD, GMX Motorbikes Krusher FA-D300B 4WD, Benyco ATV 300, Stels 300B / Hunter XTX 300B, Asun 300cc, GOES 330, Delta Force 300, Chironex Bandito 300, as well as many other brands of ATVs, UTVs (side-by-side), dirt bikes, scooters, go karts (buggies), and engines with alternative profile names. This product has been produced for 10+ years and can be applied to 2x4, 4x4 and 4x4 IRS (Independent Rear Suspension) models.

Includes Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.4010 ”JOINT A”
• 2.2.01.3020 “AIR STRAINER”

Manufacturer Part Numbers:

Buyang Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.4010 ”JOINT A”
• 2.2.01.3020 “AIR STRAINER B”

Stels Part Numbers:

• 2.2.01.4030 (LU020039) “HOSE CLAMP B”
• 2.2.01.4010 (LU020040) “JOINT A”
• 2.2.01.3020 (LU020158) “AIR STRAINER B”
• 2.2.01.4000 (LU025409) “JOINT A UNIT”

Chironex Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.3020 “JOINT A”

GOES Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.4010 ”JOINT A”
• 2.2.01.3020 “AIR STRAINER B”

GMX Motorbikes Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.4010 ”JOINT A”
• 2.2.01.3020 “AIR STRAINER B”

Atomik Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.4010 ”JOINT A”
• 2.2.01.3020 “AIR STRAINER B”

Delta Force Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.4010 ”JOINT A”
• 2.2.01.3020 “AIR STRAINER B”

Quadzilla Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.4010 ”JOINT A”
• 2.2.01.3020 “AIR STRAINER B”

Benyco Part Numbers:

• 2.2.01.4030 “HOSE CLAMP B”
• 2.2.01.4000 ”JOINT A”
• 2.2.01.3020 “AIR STRAINER B”