This is a Stator / Magneto Coil which applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc, 140cc and 150cc manual shift and automatic ATV and Dirt Bike engines. Most commonly used for 125cc ... More Details

Magneto Coil (Stator) for 50cc GY6 style 4-stroke engines. 8 Pole, 4 wire for standard DC fired ignition systems. Approximate Dimensions: Outside Diameter: 88.1mm Centre Hole Diameter: 29... More Details

Magneto Coil (Stator) for 50cc GY6 style 4-stroke engines. 8 Pole, 2 wire for standard DC fired ignition systems. ... More Details

Stator - Magneto Coil, 5AX100, 2 Wire ... More Details

Stator Magneto Coil - C100-6, 5 wire. Approximate dimensions: Outside Diameter: 83mm Centre Hole Diameter: 28.9mm Mounting Hole (centre-centre): 41.1mm Bolt Hole: 6.4mm Harness Le... More Details

Stator Magneto Coil - C100-6. 5 wire, one four wire female plug and one male push pin. Approximate dimensions: Outside Diameter: 83.1mm Centre Hole Diameter: 29.1mm Mounting Hole (centre... More Details

Stator Magneto Coil - C100-6. 5 wire, one 4 pin 3 wire male plug and two male push pin wires. Approximate dimensions: Outside Diameter: 83mm Centre Hole Diameter: 29mm Mounting Hole (cen... More Details

Stator Magneto Coil, 12VB-C6. 5 wire, one four wire male plug and one male push pin. Approximate dimensions: Outside Diameter: 83.1mm Centre Hole Diameter: 29.1mm Mounting Hole (centre-centre): 41mm... More Details

Stator / Magneto Coil - CB6. Approximate dimensions: Outside Diameter: 83mm Centre Hole Diameter: 29.1mm Mounting Hole (centre-centre): 41.2mm Bolt Hole: 6.5mm Harness Length: 45c... More Details

Stator / Magneto Coil - CB8. Approximate dimensions: Outside Diameter: 88.5mm Centre Hole Diameter: 28.8mm Mounting Hole (centre-centre): 41mm Bolt Hole: 6.4mm Harness Length: 40c... More Details

Stator / Magneto Coil - CB8, WY125 5-wire. Approximate dimensions: Outside Diameter: 88.6mm Centre Hole Diameter: 29.2mm Mounting Hole (centre-centre): 40.8mm Bolt Hole: 6.4mm Har... More Details

Stator / Magneto Coil - CBT11. Commonly used on (but not limited to) such models as the Baja Wilderness 250 ATV (250cc ATV). Approximate dimensions: Outside Diameter: 92.9mm Centre Hole Di... More Details

Stator / Magneto Coil - CBT125. Also commonly used for other models of similar displacements, particularly 11 coil GY6 applications. Approximate dimensions: Outside Diameter: 93mm Centre H... More Details

Stator - Magneto Coil, CG11, 7 Wire. Approximate dimensions: Outside Diameter: 93mm Centre Hole Diameter: 31.8mm Mounting Hole (centre-centre): 40mm, 28mm Bolt Hole: 5.7mm Harness... More Details

Stator / Magneto Coil - CG12, 5 Wire. Stator has a 3 wire female plug and 2 wires with bullet connectors. Approximate dimensions: Outside Diameter: 88.6mm Centre Hole Diameter: 32.1mm M... More Details

Stator / Magneto Coil - CG12. Approximate dimensions: Outside Diameter: 88.4mm Centre Hole Diameter: 32.1mm Mounting Hole (centre-centre): 40mm, 28mm Bolt Hole: 5.7mm Harness Leng... More Details

This stator is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. Common Odes model names consist of variations of "Odes 800cc UTV... More Details

Stator / Magneto Coil - CG18, CG125-18. This coil works on (but not limited to) the 300cc ATV's. Approximate dimensions: Outside Diameter: 93mm Centre Hole Diameter: 32mm Mounting Hole ... More Details

Stator / Magneto Coil - CG8. 5 wire, one 4 pin 3 wire male plug and two male push pin wires. Approximate dimensions: Outside Diameter: 88mm Centre Hole Diameter: 29.1mm Mounting Hole (c... More Details

Stator / Magneto Coil - GS18. Approximate dimensions: Outside Diameter: 92.9mm Centre Hole Diameter: 35.1mm Mounting Hole (centre-centre): 37.7mm Bolt Hole: 5.7mm Harness Length: ... More Details

Stator / Magneto Coil - GS18G. This coil works on (but is not limited to) displacements of ATVs, UTVs, go karts and buggies up to 300cc. Approximate dimensions: Outside Diameter: 93mm Centr... More Details

Stator / Magneto Coil - GY6-12 12 Coil. Approximate dimensions: Outside Diameter: 88.1mm Centre Hole Diameter: 29mm Mounting Hole (centre-centre): 40.1mm Bolt Hole: 6.3mm Harness... More Details

Stator / Magneto Coil - GY6-6. Approximate dimensions: Outside Diameter: 83.1mm Centre Hole Diameter: 29mm Mounting Hole (centre-centre): 41.2mm Bolt Hole: 6.4mm Harness Length: 4... More Details

Stator / Magneto Coil, GY6-6. Plug is a 4 pin 3 wire male plug, 2 wires with bullet connectors. Approximate dimensions: Outside Diameter: 83mm Centre Hole Diameter: 29.2mm Mounting Hole... More Details

Stator / Magneto Coil - GY6-8, 5-wire. Approximate dimensions: Outside Diameter: 88mm Centre Hole Diameter: 29.1mm Mounting Hole (centre-centre): 41.2mm Bolt Hole: 6.4mm Harness L... More Details

Stator / Magneto Coil - GY650-8, 3-wire. Used on a wide variety of machines, statistically most commonly found on GY6 profile 50cc scooters and go-karts/buggies. Approximate dimensions: Outside D... More Details

This 125cc high output / high performance stator is applicable (and not limited) to 90cc to 250cc dirt bikes, most commonly used for 125cc and 140cc pit bikes. Plate diameter is 11.5cm and the mounti... More Details

Performance Racing Stator (Magneto Coil) with Rotor for 50cc to 150cc engines. Fits many GY6 profile engines from the 50cc to 250cc range. Most commonly used with 150cc GY6 engines. Approximate dime... More Details

Stator / Magneto Coil - WY8. Approximate dimensions: Outside Diameter: 88.3mm Centre Hole Diameter: 35.1mm Mounting Hole (centre-centre): 37.9mm Bolt Hole: 6.2mm Harness Length:... More Details

Stator / Magneto Coil - Yamaha PW50. Commonly used for (but not limited to) direct replacement magneto cylinder for PW50 (Yamaha Pewee 50) and other similarly configured kids or youth machines. Appr... More Details

Stator / Magneto - Yamaha PW80. G80-F09-A. This stator assembly is most commonly (though not exclusively) used for Yamaha Peewee 80 aka PW80 models produced since 2007. Note that this stator does n... More Details

Stator Cover - 250cc, 3 Bolt, Electric Start ... More Details

This stator ignition pick up, trigger pulsar coil is typically found in Flywheels / Magnetor Assy / Crankshaft Assy & Piston / Magngeo Comp. / Magneto Comp. / Electrical Start Propeller / Stator ... More Details

Steering Assembly commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc displacement machines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in... More Details

This steering assembly is commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in the Chi... More Details

This Steering Drive Axle (utv direction steering drive shaft assy) is used for a wide displacement range of UTVs. Most popularly applies to 800cc, 500cc and 700cc UTVs from companies like Nordik, Hi... More Details

Steering knuckle (aka spindle), right side (for left side see part number 70A4226), most commonly used for (but not limited to) 50cc to 300cc ATVs. Associated Parts: 70A4125 Axle Hub ... More Details

This left-side steering knuckle (aka spindle or front stub axle) is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. Pop... More Details

This right-side steering knuckle (aka spindle or front stub axle) is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. Po... More Details

Steering knuckle (aka spindle), left side (for right side see part number 70A4225), most commonly used for (but not limited to) 50cc to 300cc ATVs. Associated Parts: 70A4125 Axle Hub ... More Details

This Front Right Steering Knuckle Assembly is used for a wide displacement range of UTVs. Most popularly applies to 400cc, 800cc, 500cc and 700cc UTVs from companies like Nordik, Hisun (HSUN) and Po... More Details

This Front Left Steering Knuckle Assembly is used for a wide displacement range of UTVs. Most popularly applies to 400cc, 800cc, 500cc and 700cc UTVs from companies like Nordik, Hisun (HSUN) and Pow... More Details

This Rear Left Steering Knuckle Assembly is used for a wide displacement range of UTVs. Most popularly applies to 800cc, 500cc and 700cc UTVs from companies like Nordik, Hisun (HSUN) and Powermax. ... More Details

This Rear Right Steering Knuckle Assembly is used for a wide displacement range of UTVs. Most popularly applies to 800cc, 500cc and 700cc UTVs from companies like Nordik, Hisun (HSUN) and Powermax. ... More Details

Steering lock for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 5.3.01.0350. This steering lock does not come with a key. Applies primarily ... More Details

Steering pole / Steering rod. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in the... More Details

Steering tension rod - ballpin assembly (Tie Rod). Set of 2pcs. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the worl... More Details

Steering Wheel - ergonomic, high strength with soft grips. This steering wheel profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format ... More Details

This steering wheel is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. Popularly applies to the Fuxin 110cc and 125cc g... More Details

Steering Wheel - ergonomic, high strength with soft grips. This steering wheel profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format... More Details

This sway bar stabilizer is typically found in Rear Suspension section of several part manuals. Commonly used for but not limited to 400cc, 500cc, 600cc, 625cc, and 800cc engines. It is most popularly... More Details

***Note: The factory has updated the part number from 5.3.01.0023 to 5.3.01.0028. They assure us the the new part number will still work with all the older machines, please feel free to contact us t... More Details

*Note* in 2019 the primary production factory for this part began to produce a slightly different variation that still works with older models. Same design and same plugs but the horn component is no... More Details

Left switch assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV, Feishen 5... More Details

This switch applies to (but is not limited to) 50cc to 250cc ATVs as well as various models of electric and gas scooters. The total wire length is 62cm. ... More Details

This switch applies to (but is not limited to) 50cc to 250cc ATVs as well as various models of electric and gas scooters. The total wire length is 62cm. Light Switch Kill Switch Choke Lever Wir... More Details

This switch is commonly used for (but is not limited to) 50cc to 250cc ATV. The total wire length is 90cm. Wire Length: 900mm Connector A: 9 Pin Female Connector B: 2 Pin Female ... More Details

This switch can be used for (but is not limited to) 50-250cc ATVs. Switch is 3.2cm wide and the wire length is 55cm. One 4 pin female connector and 1 3 pin female connector. Switch Width: 32m... More Details

This kill switch applies to (but is not limited to) 50cc to 250cc dirt bikes. This kill switch also contains an electric start feature, making this module one of the most commonly used for the 50cc, ... More Details

This genuine CF Moto left handlebar switch (aka main function switch) is typically found in the Handlebar section of several part manuals. Commonly used for but not limited to 4-stroked water cooled ... More Details

This handle bar mounted switch is often referred to as "instrument switch", "light switch" "starter switch" and many other names. Most commonly (but not exclusively) used for 400cc ATVs from companie... More Details

This handle bar mounted switch is often referred to as "instrument switch", "light switch" "starter switch" and many other names. Most commonly (but not exclusively) used for 400cc ATVs from companie... More Details

Switch for mini ATV. Switch is 2cm wide and the wire length is 70.5cm. Commonly used for but not limited to 50cc to 250cc ATVs and dirt bikes. ... More Details

Left handle switch assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV, Fe... More Details

Left switch assembly. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machine... More Details

Left switch assembly. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and s... More Details

Handlebar left switch assembly. Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines... More Details

Switch - Scooter, 3 Speed Control Switch ... More Details

Switch - Scooter, Headlight, Lever ... More Details

Switch - Scooter, Horn ... More Details

Switch - Scooter, Horn, Turn Signal, Headlight ... More Details

Switch - Scooter, Horn, Turn Signal, Headlight ... More Details

Switch - Scooter, Horn, Turn Signal, Headlight ... More Details

Switch - Scooter, Horn, Turn Signal, Headlight ... More Details

This switch panel / instrument switch assembly consists of the headlights, turning signals, horn and electric dump box switches. Commonly used for a wide range of UTVs. Most popularly applies to t... More Details

Switch Panel - Combined Switch Assembly, XY500UE, XY600UE, UTV. This switch panel - combined switch assembly is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4... More Details

This temperature sensor (aka thermoswitch) is commonly used for but not limited to 125cc, 150cc, 250cc, 400cc, 500cc, 520cc, 600cc, 625cc, and 800cc engines. It is most popularly known for its use in... More Details

Tension spring. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines are ... More Details

Timing chain adjuster gasket. Commonly used for (but not limited to) 400cc and 500cc engines, such as the Hisun 400cc and Hisun 500cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebra... More Details

This thermostat applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide range o... More Details

This thermostat temperature retainer is commonly used for but not limited to 125cc, 150cc, and 250cc. It is most popularly known for its use in Honda Helix CH150D AC - Elite 150 / CN250 AC - Elite 250... More Details

Hand Throttle & Display Assembly. Direct replacement for SHOK Scooters Electron kick scooters as well as many other brands and models. ... More Details

This brake lever and throttle assembly applies to (but is not limited to) 50cc to 250cc ATVs. Lever assembly has built-in parking brake feature and adjustable throttle (throttle governor) for safety.... More Details

Throttle assembly / electric thumb throttle module. Wuxing 130X profile, universal 12-72V (12V, 24V, 36V, 48V, 60V, 72V), 22mm (0.87in), waterproof rated. Direct replacement for SHOK Scooters Fusion h... More Details

Throttle assembly / electric thumb throttle module. Direct replacement for SHOK Scooters Graviton kick scooters as well as many other brands and models. ... More Details

Throttle assembly / electric thumb throttle module. Direct replacement for SHOK Scooters Proton and Neutron kick scooters as well as many other brands and models such as Segway Ninebot and Xiaomi. ... More Details

Throttle body (Damper D46-5). Commonly used for (but not limited to) 500cc engines, such as the Hisun 500cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These... More Details

Throttle body (Damper D46-4). Commonly used for (but not limited to) 700cc engines, such as the Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These... More Details

Throttle body (Damper D46-1). Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. These mac... More Details

Throttle body (Damper D42-2). Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displaceme... More Details

Throttle body. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in the Chironex ... More Details

Throttle Body ranged as "300cc to 600cc" applicable. Very similar to part #80A7005. Most commonly used for (but not limited to) Chironex Spartan 500cc UTVs (4x4/2x4 and similar variations), CF Moto 50... More Details

Throttle Body ranged as "300cc to 600cc" applicable. Very similar to part #80A7000. Most commonly used for (but not limited to) Chironex Spartan 600cc UTVs (4x4/2x4 and similar variations), CF Moto 60... More Details

Throttle cable (aka gun cable) commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in ... More Details

Throttle cable (aka gun cable) commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in ... More Details

This throttle cable is typically found in the Handlebar section of several part manuals. Commonly used for but not limited to 300cc, 330cc, 550cc, and 600cc engines. It is most popularly known for it... More Details

Throttle Cable. Total Core Wire Length: 119.5cm Sheath Length: 112cm (inline adj. at min.) Cable Travel Length: 6.5cm Cable Stops: 5.9mm, 3mm ... More Details

Throttle Cable. Approximate Dimensions: Total Core Wire Length: 120cm Sheath Length: 110cm (inline adj. at min.) Cable Travel Length: 9cm Cable Stops: 5.9mm, 3mm ... More Details

This throttle cable profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for ATVs, UTVs (side-by-side), carts, buggies and other mac... More Details

This throttle cable profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for ATVs, UTVs (side by side), carts, buggies and all types... More Details