Select Category
Express Parts Catalog
Stator - Magneto Coil, GS18G, 5 Wire - 30A9388 - PBC2014F1
Electrical, Stators / Magneto Coils
$89.47
Stator / Magneto Coil - GS18G. This coil works on (but is not limited to) displacements of ATVs, UTVs, go karts and buggies up to 300cc. Approximate dimensions:
Outside Diameter: 93mm
Centr...
More Details
Stator - Magneto Coil, GY6-12, 4 Wire - 30A9370 - PBC2031F1
Electrical, Stators / Magneto Coils
$52.86
Stator / Magneto Coil - GY6-12 12 Coil. Approximate dimensions:
Outside Diameter: 88.1mm
Centre Hole Diameter: 29mm
Mounting Hole (centre-centre): 40.1mm
Bolt Hole: 6.3mm
Harness...
More Details
Stator - Magneto Coil, GY6-6, 4 Wire - 30A9310 - PBC2250F1
Electrical, Stators / Magneto Coils
$52.86
Stator / Magneto Coil - GY6-6. Approximate dimensions:
Outside Diameter: 83.1mm
Centre Hole Diameter: 29mm
Mounting Hole (centre-centre): 41.2mm
Bolt Hole: 6.4mm
Harness Length: 4...
More Details
Stator - Magneto Coil, GY6-6, 5 Wire - 30A9312 - PBC2100F1
Electrical, Stators / Magneto Coils
$52.86
Stator / Magneto Coil, GY6-6. Plug is a 4 pin 3 wire male plug, 2 wires with bullet connectors. Approximate dimensions:
Outside Diameter: 83mm
Centre Hole Diameter: 29.2mm
Mounting Hole...
More Details
Stator - Magneto Coil, GY6-8, 4 Wire - 30A9335 - PBC2003F1
Electrical, Stators / Magneto Coils
$52.86
Stator / Magneto Coil - GY6-8, 5-wire. Approximate dimensions:
Outside Diameter: 88mm
Centre Hole Diameter: 29.1mm
Mounting Hole (centre-centre): 41.2mm
Bolt Hole: 6.4mm
Harness L...
More Details
Stator / Magneto Coil - GY650-8, 3-wire. Used on a wide variety of machines, statistically most commonly found on GY6 profile 50cc scooters and go-karts/buggies.
Approximate dimensions:
Outside D...
More Details
Stator - Magneto Coil, Performance, 125cc to 140cc - 30A9040 - PBC2217F1
Electrical, Stators / Magneto Coils
$73.20
This 125cc high output / high performance stator is applicable (and not limited) to 90cc to 250cc dirt bikes, most commonly used for 125cc and 140cc pit bikes. Plate diameter is 11.5cm and the mounti...
More Details
On Back Order
You can still reserve this item now.
Stator - Magneto Coil, Performance, 50cc to 150cc, GY6 - 30A9055 - PBC2406F1
Electrical, Stators / Magneto Coils
$73.20
Performance Racing Stator (Magneto Coil) with Rotor for 50cc to 150cc engines. Fits many GY6 profile engines from the 50cc to 250cc range. Most commonly used with 150cc GY6 engines. Approximate dime...
More Details
Stator / Magneto Coil - WY8. Approximate dimensions:
Outside Diameter: 88.3mm
Centre Hole Diameter: 35.1mm
Mounting Hole (centre-centre): 37.9mm
Bolt Hole: 6.2mm
Harness Length:...
More Details
Stator - Magneto Coil, Yamaha PW50, 4 Wire - 30A9328 - PBC1952F1
Electrical, Stators / Magneto Coils
$52.86
Stator / Magneto Coil - Yamaha PW50. Commonly used for (but not limited to) direct replacement magneto cylinder for PW50 (Yamaha Pewee 50) and other similarly configured kids or youth machines. Appr...
More Details
Stator / Magneto Coil - Yamaha PW80 - 30A9800 - PBC2290F1
Electrical, Stators / Magneto Coils
$48.80
Stator / Magneto - Yamaha PW80. G80-F09-A. This stator assembly is most commonly (though not exclusively) used for Yamaha Peewee 80 aka PW80 models produced since 2007. Note that this stator does n...
More Details
Stator Cover - 250cc, 3 Bolt, Electric Start - 30A2465CR - PBC1651F1
Engines & Engine Parts, Engine Covers
$17.89
Stator Cover - 250cc, 3 Bolt, Electric Start ...
More Details
This stator ignition pick up, trigger pulsar coil is typically found in Flywheels / Magnetor Assy / Crankshaft Assy & Piston / Magngeo Comp. / Magneto Comp. / Electrical Start Propeller / Stator ...
More Details
Steering Assembly - UTV, ATV, 1100CC, Crossfire 1100GT - PBC9899FF1
Body, Steering Knuckles & Assemblies, Steering Wheels
$390.42
Steering Assembly commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc displacement machines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in...
More Details
Steering Assembly - XY1100UE, 1100cc, UTV, ATV - 60A3600 - PBC487F1
Body, Steering Knuckles & Assemblies
$309.08
This steering assembly is commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in the Chi...
More Details
This Steering Drive Axle (utv direction steering drive shaft assy) is used for a wide displacement range of UTVs.
Most popularly applies to 800cc, 500cc and 700cc UTVs from companies like Nordik, Hi...
More Details
Steering knuckle (aka spindle), right side (for left side see part number 70A4226), most commonly used for (but not limited to) 50cc to 300cc ATVs.
Associated Parts:
70A4125 Axle Hub
...
More Details
Steering Knuckle - ATV, Front Left - 70A4221 - PBC459F1
Steering Knuckles & Assemblies, Brakes
$48.80
This left-side steering knuckle (aka spindle or front stub axle) is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. Pop...
More Details
Steering Knuckle - ATV, Front Right - 70A4220 - PBC458F1
Steering Knuckles & Assemblies, Brakes
$48.80
This right-side steering knuckle (aka spindle or front stub axle) is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. Po...
More Details
Steering knuckle (aka spindle), left side (for right side see part number 70A4225), most commonly used for (but not limited to) 50cc to 300cc ATVs.
Associated Parts:
70A4125 Axle Hub
...
More Details
Steering Knuckle - Front Left, 700cc, UTV, Hisun - 70A4251 - PBC475F1
Steering Knuckles & Assemblies, Brakes
$195.21
This Front Right Steering Knuckle Assembly is used for a wide displacement range of UTVs.
Most popularly applies to 400cc, 800cc, 500cc and 700cc UTVs from companies like Nordik, Hisun (HSUN) and Po...
More Details
On Back Order
You can still reserve this item now.
Steering Knuckle - Front Right, 700cc, UTV, Hisun - 70A4250 - PBC461F1
Steering Knuckles & Assemblies, Brakes
$195.21
This Front Left Steering Knuckle Assembly is used for a wide displacement range of UTVs.
Most popularly applies to 400cc, 800cc, 500cc and 700cc UTVs from companies like Nordik, Hisun (HSUN) and Pow...
More Details
Steering Knuckle - Rear Left Assembly, 700cc, UTV, Hisun - 70A4256 - PBC542F1
Steering Knuckles & Assemblies, Brakes
$211.48
This Rear Left Steering Knuckle Assembly is used for a wide displacement range of UTVs.
Most popularly applies to 800cc, 500cc and 700cc UTVs from companies like Nordik, Hisun (HSUN) and Powermax.
...
More Details
On Back Order
You can still reserve this item now.
Steering Knuckle - Rear Right, 700cc, UTV, Hisun - 70A4255 - PBC557F1
Steering Knuckles & Assemblies, Brakes
$195.21
This Rear Right Steering Knuckle Assembly is used for a wide displacement range of UTVs.
Most popularly applies to 800cc, 500cc and 700cc UTVs from companies like Nordik, Hisun (HSUN) and Powermax.
...
More Details
Steering Lock - 150cc to 400cc, ATV, Dirt Bike, 300cc, 2x4, 4x4 and 4x4 IRS - LCK1200 - PBC347F1
Body, Steering Knuckles & Assemblies
$40.66
Steering lock for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 5.3.01.0350. This steering lock does not come with a key. Applies primarily ...
More Details
On Back Order
You can still reserve this item now.
Steering Rod - XY1100, Chironex 1000cc, 1100cc - 90A3595 - PBC498F1
Body, Steering Knuckles & Assemblies, Brakes
$102.11
Steering pole / Steering rod. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in the...
More Details
On Back Order
You can still reserve this item now.
Steering Tension Rod - 250cc, ATV, Jianshe, Baja - 90A3596 - PBC3314F1
Tie Rods / Ball Joints
$73.20
Steering tension rod - ballpin assembly (Tie Rod). Set of 2pcs. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the worl...
More Details
On Back Order
You can still reserve this item now.
Steering Wheel - ergonomic, high strength with soft grips. This steering wheel profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format ...
More Details
On Back Order
You can still reserve this item now.
This steering wheel is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. Popularly applies to the Fuxin 110cc and 125cc g...
More Details
Steering Wheel - ergonomic, high strength with soft grips. This steering wheel profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format...
More Details
Sway Bar - Stabilizer, CF Moto, 400cc, 500cc, 600cc, 625cc, 800cc Adventure 500 - PBC9439FF1
Body
$77.26
This sway bar stabilizer is typically found in Rear Suspension section of several part manuals. Commonly used for but not limited to 400cc, 500cc, 600cc, 625cc, and 800cc engines. It is most popularly...
More Details
Switch - 150cc to 550cc, ATV, 300cc, 2x4, 4x4 and 4x4 IRS - 10A8156 - PBC2342F1
Electrical, Handle Bar & Brake Switches
$61.00
***Note: The factory has updated the part number from 5.3.01.0023 to 5.3.01.0028. They assure us the the new part number will still work with all the older machines, please feel free to contact us t...
More Details
Switch - 150cc to 600cc, ATV, 300cc, 2x4, 4x4 and 4x4 IRS - 10A8131 - PBC1994F1
Electrical, Handle Bar & Brake Switches
$48.80
*Note* in 2019 the primary production factory for this part began to produce a slightly different variation that still works with older models. Same design and same plugs but the horn component is no...
More Details
On Back Order
You can still reserve this item now.
Left switch assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV, Feishen 5...
More Details
This switch applies to (but is not limited to) 50cc to 250cc ATVs as well as various models of electric and gas scooters. The total wire length is 62cm. ...
More Details
On Back Order
You can still reserve this item now.
This switch applies to (but is not limited to) 50cc to 250cc ATVs as well as various models of electric and gas scooters. The total wire length is 62cm.
Light Switch
Kill Switch
Choke Lever
Wir...
More Details
This switch is commonly used for (but is not limited to) 50cc to 250cc ATV. The total wire length is 90cm.
Wire Length: 900mm
Connector A: 9 Pin Female
Connector B: 2 Pin Female
...
More Details
This switch can be used for (but is not limited to) 50-250cc ATVs. Switch is 3.2cm wide and the wire length is 55cm. One 4 pin female connector and 1 3 pin female connector.
Switch Width: 32m...
More Details
Switch - 50cc to 250cc, Electric Start, Dirt Bike - 10D8000 - PBC2059F1
Electrical, Handle Bar & Brake Switches
$20.33
This kill switch applies to (but is not limited to) 50cc to 250cc dirt bikes. This kill switch also contains an electric start feature, making this module one of the most commonly used for the 50cc, ...
More Details
On Back Order
You can still reserve this item now.
Switch - CF Moto 500cc, CF500, Left Hand - 10A8135 - PBC2196F1
Electrical, Handle Bar & Brake Switches
$89.47
This genuine CF Moto left handlebar switch (aka main function switch) is typically found in the Handlebar section of several part manuals. Commonly used for but not limited to 4-stroked water cooled ...
More Details
On Back Order
You can still reserve this item now.
