This is a performance Aluminum brake and clutch lever set. Most commonly used for (but not limited to) 110cc to 250cc dirt bikes. ... More Details

Brake & Clutch Lever Set - Aluminum, Black ... More Details

Brake & Clutch Lever Set - Aluminum, Black ... More Details

Brake & Clutch Handle, primarily used for (but not exclusively used for) motorcycles, dirt bikes and scooters. ... More Details

This is a performance Aluminum chrome brake and clutch lever set. Most commonly used for (but not limited to) 110cc to 250cc dirt bikes. ... More Details

Brake & Clutch Lever Set - Aluminum, Dirt Bike, Black ... More Details

This is a performance aluminium collapsible brake and clutch lever set. Most commonly used for (but not limited to) 110cc to 250cc dirt bikes. ... More Details

Brake & Clutch Lever Set - Yamaha PW50, Throttle Housing and Control Switch ... More Details

This brake lever is most commonly used for lower displacement dirt bikes from the 50cc to 250cc range. It is the brake handle from the LVR3210BK clutch handle set. ... More Details

Brake lever, aluminum, black. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many othe... More Details

This brake lever is most commonly used for lower displacement dirt bikes from the 50cc to 250cc range. It is the brake handle from the LVR3210CR clutch handle set. ... More Details

Hand brake lever / handlebar mounted brake handle. PC/ABS and aluminum Alloy, KB-039 profile, IP54/IP65 waterproof rating. Direct replacement for SHOK Scooters Fusion hybrid e-bike/e-scooter, SHOK Sco... More Details

Hand brake lever / handlebar mounted brake handle. Direct replacement for SHOK Scooters Graviton kick scooters as well as many other brands and models. ... More Details

Hand brake lever / handlebar mounted brake handle. Direct replacement for SHOK Scooters Proton kick scooters as well as many other brands and models such as Segway Ninebot and Xiaomi. ... More Details

Left handlebar assembly. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands an... More Details

Brake Lever - Left Hand, Aluminum, Black ... More Details

Brake Lever - Left Hand, Aluminum, Black ... More Details

Brake Lever - Left Hand, Aluminum, Black ... More Details

Brake Lever - Left Hand, Aluminum, Black ... More Details

Brake Lever - Left Hand, Aluminum, Black. Length of 200mm. ... More Details

Brake Lever - Left Hand, Aluminum, Black, Honda. Length of 150mm. ... More Details

Left brake lever. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and simil... More Details

Left handlebar assembly. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands an... More Details

Left hand lever assembly. Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines. C... More Details

Brake Lever - Right Hand, Aluminum, Black ... More Details

Brake Lever - Right Hand, Aluminum, Black ... More Details

Brake Lever - Right Hand, Aluminum, Black ... More Details

Brake Lever - Right Hand, Aluminum, Black ... More Details

Brake Lever - Right Hand, Aluminum, Black ... More Details

Hand brake lever, alumnimum, black, right hand. Most commonly used for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 4.3.01.0010. Applies p... More Details

Brake Lever - Right Hand, Aluminum, Black, BR125 ... More Details

Brake Lever - Right Hand, Aluminum, Black, T125 ... More Details

Brake Lever - Right Hand, Aluminum, Black, YR125. Length of 170mm. ... More Details

Hand Brake Lever. Direct replacement for SHOK Scooters Neutron kick scooters as well as many other brands and models. ... More Details

Brake Lever / Thumb Brake. Direct replacement for SHOK Scooters Electron kick scooter as well as many other brands and models. ... More Details

This left brake lever with attached oil reservoir is commonly (but not exclusively) used for 400cc to 800cc ATVs and UTVs. Common model names consist of variations of "Odes 400cc ATV", "Odes 800cc AT... More Details

This left hand brake lever comes with the attached oil reservoir and applies to (but is not limited to) 50cc 70cc 90cc 110cc and 125cc ATVs. Most commonly used for 90cc and 110cc automatic ATVs. ... More Details

Left hand brake lever with attached oil reservoir. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Bu... More Details

This left hand brake lever comes with the attached oil reservoir and applies to (but is not limited to) 50cc 70cc 90cc 110cc and 125cc ATVs. Most commonly used for 90cc and 110cc automatic ATVs. ... More Details

Right hand brake lever comes with the attached oil reservoir. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as w... More Details

This right hand brake lever comes with the attached oil reservoir as well as a brake lock and applies to (but is not limited to) 50cc to 250cc ATVs. Most commonly used for 90cc, 110cc and 125cc automa... More Details

This right hand brake lever comes with the attached oil reservoir and applies to (but is not limited to) 50cc to 250cc dirt bikes. Also applies to some models of ATVs that do not use the brake lock. ... More Details

This choke lever assembly is used for many different variations of function switches for (but not limited to) 50cc to 250cc ATVs. ... More Details

This clutch lever is most commonly used for lower displacement dirt bikes from the 50cc to 250cc range. It is the clutch handle from the LVR3210CR clutch handle set. ... More Details

Foot brake lever / foot brake pedal. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI... More Details

Gear shift boot. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. These machines are com... More Details

Gear shift lever applies to (and is not limited to) 50cc, 70cc, 90cc, 110cc, 125cc, 140cc, 150cc, 200cc and 250cc engines. Most commonly used for 125cc dirt bikes. Approximate dimensions: Leve... More Details

Gear shift lever applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc and 250cc engines. Most commonly used for 125cc dirt bikes. Approximate total length is 13.5cm and a 10mm mou... More Details

Gear shift lever applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc and 250cc engines. Most commonly used for 125cc dirt bikes. Approximate dimensions: Lever: 130mm A... More Details

Gear shift lever applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc and 250cc engines. Most commonly used for 150cc dirt bikes. Total length is 17.5cm and a 10mm mounting spline... More Details

Black gear shift lever applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc and 250cc engines. Most commonly used for 140cc dirt bikes. Approximate dimensions: Lever: 120m... More Details

Chrome gear shift lever applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc and 250cc engines. Most commonly used for 140cc dirt bikes. Approximate dimensions: Lever: 120... More Details

This CNC machined gear shift lever is spring loaded at the tip. Fully aluminum and strength treated to ensure a lifetime of lightweight performance. Approximate dimensions: Lever: 125mm Ar... More Details

This CNC machined gear shift lever is spring loaded at the tip. Fully aluminum and strength treated to ensure a lifetime of lightweight performance. Approximate dimensions: Lever: 125mm Ar... More Details

This CNC machined gear shift lever is spring loaded at the tip. Fully aluminum and strength treated to ensure a lifetime of lightweight performance. Approximate dimensions: Lever: 125mm Ar... More Details

This CNC machined Gear Shift Lever is spring loaded at the tip. Fully aluminum and strength treated to ensure a lifetime of lightweight performance. Approximate dimensions: Lever: 125mm Ar... More Details

Gear shift pedal lever (aka heal/toe shift lever). Total length is 32cm with a 12mm mounting spline. This gear shift lever is most commonly (but not exclusively) used for 400cc ATVs like the Odes 400c... More Details

Gear shift lever applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc engines. Most commonly used for youth ATVs. Heal/Toe shift lever. Total length is 25.7cm and a 10mm mounting splin... More Details

Gearshift body assembly. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displaceme... More Details

Gearshift Shifter Assembly. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displac... More Details

Hand Brake Lever, complete. This lever is commonly applicable for (but not limited to) many big brand and lesser brand name machines from all over the world. Common format for UTVs in the 300cc to 10... More Details

This chrome kick start applies to ATVs, dirt bikes, scooters, buggies, go karts etc. from 50cc to 300cc. It is most commonly used for 150cc, 200cc and 250cc ATVs.... More Details

This chrome kick start applies to ATVs, dirt bikes, scooters, buggies, go karts etc. from 50cc to 300cc. It is most commonly used for 150cc, 200cc and 250cc. Total length is 23cm and a 10mm mounting s... More Details

This chrome kick start applies to ATVs, dirt bikes, scooters, buggies, go karts etc. from 50cc to 300cc. It is most commonly used for 150cc, 200cc and 250cc. Approximate dimensions: Lever: 205... More Details

This collapsible kick start is used for (but not limited to) 50cc and 150cc GY6 style engines. Approximate dimensions: Lever: 145mm Arm: 90mm Shaft Size: 13mm ... More Details

This collapsible kick start is used for (but not limited to) 50cc and 150cc GY6 style engines. Approximate dimensions: Lever: 145mm Arm: 90mm Shaft Size: 13mm ... More Details

This kick start applies to (but is not limited to) 50cc - 250cc kick start engines. Most commonly used for 110cc, 125cc and 140cc dirt bikes. Approximate dimensions: Lever: 180mm Arm: 95mm ... More Details

This kick start applies to (but is not limited to) 50cc to 250cc kick start engines. Most commonly used for 110cc, 125cc and 140cc dirt bikes. Approximate dimensions: Lever: 190mm Arm: 95mm ... More Details

This kick start applies to (but is not limited to) 50cc to 250cc kick start engines. Most commonly used for 110cc, 125cc and 140cc dirt bikes. Approximate dimensions: Lever: 190mm Arm: 95m... More Details

This kick start applies to (but is not limited to) 50cc to 250cc kick start engines. Most commonly used for 110cc, 125cc and 140cc dirt bikes. Approximate dimensions: Lever: 95mm Arm: 95mm ... More Details

Kick Start 50cc to 250cc, including but not limited to 50cc, 70cc, 90cc, 110cc, 125cc, 140cc, 150cc, 155cc, 160cc, 200cc and 250cc dirt bikes and kick start ATVs. Total length is 26cm and a 11mm mou... More Details

Kick Start. Total length is 21cm and a 15mm mounting spline.Approximate dimensions: Lever: 215mm Arm: 95mm Shaft Size: 15mm ... More Details

This kick start applies to (but is not limited to) 50cc to 250cc kick start engines. Approximate dimensions: Lever: 205mm Arm: 95mm Shaft Size: 13mm ... More Details

Kick Start, 50cc to 250cc. Recommended for, but not limited to: Pitster Pro X5 140R Pitster Pro LXR 155R Pitster Pro XTR 230/250 Approximate dimensions: Lever: 205mm Arm:... More Details

Kick Start, 50cc to 250cc. Total length is 32cm and a 15mm mounting spline. Recommended for, but not limited to: Pitster Pro X5 140R Pitster Pro LXR 155R Pitster Pro XTR 230/250 ... More Details

This collapsible black kick start is used for (but not limited to) PW50 style engines. Total length is 18cm and a 13mm mounting spline. Approximate dimensions: Lever: 130mm Arm: 85mm Sh... More Details

This kick start applies primarily to (and not limited to) Suzuki dirt bikes and cross bikes bikes as well as many Suzuki style copies. Approximate dimensions: Lever: 220mm Arm: 70mm Shaf... More Details

This kick start applies primarily to (and not limited to) Suzuki dirt bikes and cross bikes bikes as well as many Suzuki style copies. Most commonly used for Suzuki GS125 models 1982 to 1999. Total l... More Details

This drum brake lever set applies to (and is not limited to) Honda TB50, Yamaha JOG 50-100, Yamaha ZY100T, and Yamaha LYM100 models. Manufacturer Part Numbers and Product Codes (not limited to this l... More Details

This brake lever assembly kit / parking level comp. is typically found in Handlebar / Brake System section of several part manuals. Commonly used for but not limited to 400cc, 500cc, 600cc, 625cc, 80... More Details

Gear Shift Knob - 4 Range. This hand actuated gear shift knob profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for UTVs in the ... More Details

Shift knob. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines are comm... More Details

Shift knob / Gear shift handle. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV ... More Details

Shift knob. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. These machines are commonly... More Details

Shift knob. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. ... More Details

Shift Lever - Most commonly (but not exclusively) used for 150cc to 300cc ATVs ... More Details

Gear shift knob lever. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machin... More Details

Shift lever assembly. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. Common format for many machines in the ... More Details

Shift Rod. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other... More Details

Gear Shift Pole (aka gear shift lever or gear shifting mechanism) - XY500UE and XY600UE, UTV. This gear shift pole is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs ... More Details

Shifter Assembly Mounting Rod. Most commonly used for (but not limited to) 300cc and 550cc liquid cooled ATV's, UTVs, dune buggies, go karts and other similar products. Manufacturer part number 4.6.01... More Details

Shifter Assembly Mounting Rod. Most commonly used for (but not limited to) 300cc and 550cc liquid cooled ATV's, UTVs, dune buggies, go karts and other similar products. Manufacturer part number 4.6.... More Details

This brake lever and throttle assembly applies to (but is not limited to) 50cc to 250cc ATVs. Lever assembly has built-in parking brake feature and adjustable throttle (throttle governor) for safety.... More Details

This throttle lever / thumb throttle featuring a screw-adjustable throttle (throttle governor) and 2WD/4WD switch is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400... More Details

Front brake master cylinder lever with oil reservoir most commonly (but not exclusively) used for CFMoto ATVs and UTVs such as Cforce CF500-2 ATV 2007-2014, Cforce CF500-2A ATV 2007-2014, CF600-C, CF... More Details

Gear shifter assembly. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines... More Details

Gear shift boot. Commonly used for (but not limited to) 400cc and 500cc engines, such as the Hisun 400cc and Hisun 500cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machi... More Details

This CNC machined gear shift lever is spring loaded at the tip. Fully aluminum and strength treated to ensure a lifetime of lightweight performance. Approximate dimensions: Lever: 125mm Arm: 5... More Details

This CNC machined gear shift lever is spring loaded at the tip. Fully aluminum and strength treated to ensure a lifetime of lightweight performance. Approximate dimensions: Lever: 125mm Arm: 5... More Details

Gear shift pedal lever (aka heal/toe shift lever). Total length is 27cm (end to end including curve). This is a very common profile and is used for (but not limited to) many big brand and lesser brand... More Details