These replacement spokes fit 14 inch rims. Contains 32 individual spokes (32pcs main spokes and 32pcs spoke ends). Spoke is 14.1cm (5.6 inches) long. These individual spokes are identical to the spoke... More Details

These replacement spokes fit 16 inch rims. Contains 36 individual spokes (36pcs main spokes and 36pcs spoke ends). Spoke is 166mm (about 6.5 inches) long. ... More Details

These replacement spokes fit 17 inch rims. Contains 36 individual spokes (36pcs main spokes and 36pcs spoke ends). Spoke is 172mm (about 6.75 inches) long. ... More Details

These replacement spokes fit 18 inch rims. Contains 36 individual spokes (36pcs main spokes and 36pcs spoke ends). Each spoke is 214mm (about 8.5 inches) long. ... More Details

These replacement spokes fit 20 inch rims. Contains 36 individual spokes. Spoke is 19.5cm (7.7 inches) long. ... More Details

These replacement spokes fit 22 inch rims. Spoke is 21.7cm (8.5 inches) long. ... More Details

These replacement spokes fit 24 inch rims. Spoke is 24cm (9.5 inches) long. ... More Details

Front rim spoke set. Direct replacement for SHOK Scooters Fusion hybrid e-bike/e-scooter as well as many other brands and models. ... More Details

Rear rim spoke set. Direct replacement for SHOK Scooters Fusion hybrid e-bike/e-scooter as well as many other brands and models. ... More Details

Spring Washer, #10. 10 piece set. ... More Details

Front swing arm #12 spring washer for (but not exclusively) Chironex 1000cc and 1100cc buggies. Manufacturer PN: GB/T93 12 ... More Details

Spring Washer, #14. 10 piece set. ... More Details

Spring Washer, #16. 10 piece set. ... More Details

Spring Washer, #5. 10 piece set. ... More Details

Spring Washer, #8. 10 piece set. ... More Details

This 11 tooth procket and fits with the 420 size chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. Approximate dimensions: Outside Diameter: 48.1mm Centre Hole Diameter: 17.1... More Details

This 11 tooth front sprocket works with the 420 chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. NOTE: There are NO dual mounting holes as seen above in picture. Only center hole. App... More Details

This 11 tooth front sprocket works with the 420 chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. Approximate dimensions: Outside Diameter: 48.5mm Centre Hole Diameter: 20.1m... More Details

This 11 tooth 428sprocket works with the 428 chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. Approximate dimensions: Outside Diameter: 48.2mm Centre Hole Diameter: 17mm ... More Details

This 11 tooth sprocket works with the 428 chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. Approximate dimensions: Outside Diameter: 48.7mm Centre Hole Diameter: 20mm Thi... More Details

This 11 teeth sprocket fits with T8F / 8mm / BF05T chain. Sprocket has a diameter of 3cm and total thickness of 1.2cm. ... More Details

This 12 tooth performance front sprocket and fits a 420 size chain. Approximate dimensions: Outside Diameter: 53mm Centre Hole Diameter: 17mm Thickness: 6.1mm Associated Parts... More Details

This 12 tooth performance front sprocket and fits 420 size chain. Approximate dimensions: Outside Diameter: 53.1mm Centre Hole Diameter: 20.1mm Thickness: 7mm ... More Details

This 12 tooth performance front sprocket and fits a 428 size chain. Most commonly used for 125cc and 140cc dirt bikes. *** CURRENT BATCH HAS BOLT HOLES. *** Approximate dimensions: Outside ... More Details

This 12 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 53.5mm Centre Hole Diameter: 20mm Thickness: 6.8mm ... More Details

This 13 tooth performance front sprocket and fits with 420 size chain. Approximate dimensions: Outside Diameter: 55.3mm Centre Hole Diameter: 17.1mm Thickness: 5.8mm Associate... More Details

This 13 tooth performance front sprocket and works with the 420 size chain. Approximate dimensions: Outside Diameter: 56.1mm Centre Hole Diameter: 20.1mm Thickness: 6mm Associ... More Details

This 13 tooth performance front sprocket works with the 428 chain. Most commonly used for 125cc and 140cc dirt bikes. Approximate dimensions: Outside Diameter: 55mm Centre Hole Diameter: 17... More Details

This 13 tooth performance front sprocket works with 428 chain. Approximate dimensions: Outside Diameter: 55.2mm Centre Hole Diameter: 20mm Thickness: 6.7mm Associated Parts: ... More Details

This 14 tooth performance front sprocket works with the420 size chain. ATA110B/D/F/H/L, ATA125A/D/E/G/H/T,ATA135D Tao Tao. Approximate dimensions: Outside Diameter: 61.1mm Centre Hole Diam... More Details

This 14 tooth performance front sprocket works with the 420 size chain. Approximate dimensions: Outside Diameter: 61mm Centre Hole Diameter: 20.1mm Thickness: 5.9mm Associated... More Details

This 14 tooth performance front sprocket works with 428 chain. Approximate dimensions: Outside Diameter: 61mm Centre Hole Diameter: 17mm Thickness: 6.9mm Associated Parts: ... More Details

This 14 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 61mm Centre Hole Diameter: 20mm Thickness: 6.9mm Associated Parts:... More Details

This 14 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 60.9mm Centre Hole Diameter: 20mm Thickness: 7mm ... More Details

This 14 teeth sprocket fits with T8F / 8mm / BF05T chain. Approximate outer diameter (OD) is 4cm. ... More Details

This 15 tooth performance front sprocket works with the 420 size chain. Approximate dimensions: Outside Diameter: 65mm Centre Hole Diameter: 17.1mm Thickness: 5.8mm Associated ... More Details

This 15 tooth performance front sprocket works with the 420 size chain. Approximate dimensions: Outside Diameter: 64.7mm Centre Hole Diameter: 20.1mm Thickness: 6mm Associated... More Details

This 15 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 65mm Centre Hole Diameter: 17mm Thickness: 6.9mm Associated Parts: ... More Details

This 15 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 64.8mm Centre Hole Diameter: 20mm Thickness: 6.5mm Associated Parts... More Details

This 15 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 65mm Centre Hole Diameter: 20mm Thickness: 6.9mm ... More Details

This 15 tooth performance front sprocket works with the 520 chain. Approximate dimensions: Outside Diameter: 65.1mm Centre Hole Diameter: 20mm Thickness: 6.7mm Associated Parts... More Details

This 16 tooth performance front sprocket and works with 420 size chain. Approximate dimensions: Outside Diameter: 69.2mm Centre Hole Diameter: 17.1mm Thickness: 6mm Associated ... More Details

This 16 tooth performance front sprocket works with the 420 chain. Approximate dimensions: Outside Diameter: 68.2mm Centre Hole Diameter: 20mm Thickness: 5.9mm Associated Parts... More Details

This 16 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 69.1mm Centre Hole Diameter: 17mm Thickness: 7mm Associated Parts: ... More Details

This 16 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 68.1mm Centre Hole Diameter: 20mm Thickness: 6.9mm Associated Parts... More Details

This 16 tooth performance front sprocket works with the 520 chain. Approximate dimensions: Outside Diameter: 69.1mm Centre Hole Diameter: 20mm Thickness: 6.8mm Associated Parts... More Details

This 17 tooth performance front sprocket works with the 420 chain. Approximate dimensions: Outside Diameter: 73.2mm Centre Hole Diameter: 17mm Thickness: 5.8mm Associated Part... More Details

This 17 tooth performance front sprocket works with the 420 chain. Approximate dimensions: Outside Diameter: 73.1mm Centre Hole Diameter: 20mm Thickness: 7.1mm Associated Parts... More Details

This 17 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 72.9mm Centre Hole Diameter: 17mm Thickness: 6.9mm Associated Part... More Details

This 17 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 72.9mm Centre Hole Diameter: 17mm Thickness: 6.9mm Associated Parts: 20A1917 Lock sprock... More Details

This 17 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 72.9mm Centre Hole Diameter: 20mm Thickness: 6.9mm Associated Parts... More Details

This 17 teeth sprocket fits with T8F / 8mm / BF05T chain. Sprocket has a diameter of 4.7cm and total thickness of 1.2cm. ... More Details

Pocket Bike Sprocket Big 6T. This sprocket has a total length of 3.8cm. Threaded spindle has a length of 1.3cm with a diameter of 0.9cm. ... More Details

Pocket Bike Sprocket Big 7T. This sprocket has a total length of 3.8cm. Threaded spindle has a length of 1.3cm with a diameter of 0.9cm. ... More Details

Pocket Bike Sprocket Small 6T. This sprocket has a total length of 3.7cm. Threaded spindle has a length of 1.2cm with a diameter of 0.8cm. ... More Details

Pocket Bike Sprocket Small 6T. This sprocket has a total length of 35.3mm. Threaded spindle has a length of 12mm with a diameter of 7.75mm. Outside Diameter: 35.3mm Centre Hole Diameter: 12mm ... More Details

This 30 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:... More Details

This 33 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimension... More Details

This 34 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions: ... More Details

This 36 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimension... More Details

This 34 tooth rear sprocket is made from hardened, corrosion resistant steel. This sprocket is a direct fit for the bulk of the standard rim sizes we carry. Commonly (though not exclusively) used ... More Details

This 35 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions: O... More Details

This 35 tooth, 428 chain rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate ... More Details

This 36 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions... More Details

This 36 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions... More Details

This 37 tooth rear sprocket is made from hardened, corrosion resistant steel. This sprocket is a direct fit for the bulk of the standard rim sizes we carry. Commonly (though not exclusively) use... More Details

This 37 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:... More Details

This 37 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimension... More Details

This 38 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:... More Details

This 38 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:... More Details

This 38 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:... More Details

This 40 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions... More Details

This 40 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:... More Details

This 41 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. TaoTao product number ... More Details

This 41 tooth rear sprocket is made from hardened, corrosion resistant steel. Rear drive assembly included. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and b... More Details

This 41 tooth rear sprocket is made from hardened, corrosion resistant steel. Associated sprocket for many of the rim and wheel assemblies that we carry. ... More Details

This 42 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:... More Details

This 42 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:... More Details

This 54 tooth rear sprocket is made from hardened, corrosion resistant steel. Fits with T8F / 8mm / BF05T chain. Used for a wide range of powersport applications and has become popularly used for 2-... More Details

This 68 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for pocket dirt bikes, ATVs, go karts and buggies. Approximate dimensions: ... More Details

Sprocket axle hub sprocket mount most commonly used for (but not limited to) 50cc to 300cc ATVs. Approximate dimensions: Total Length: 37.1mm Mounting Hole (centre-centre): 48mm Sprocket... More Details

Sprocket axle hub most commonly used for (but not limited to) 50cc to 300cc ATVs. Approximate dimensions: Collar Outside Diameter: 68.3mm Collar Outside Thickness: 9.2mm Bolt Stud Hole: ... More Details

Sprocket Set - Rear 420-41T, Front 420-14T. JH70 Rear Sprocket: Outside Diameter: 170mm Centre Hole Diameter: 54.3mm Mounting Hole (centre-centre): 50mm Mounting Hole (centre-centr... More Details

Sprocket Set - Rear 428-38T, Front 428-15T. WY125 Rear Sprocket: Outside Diameter: 159mm Centre Hole Diameter: 57.9mm Mounting Hole (centre-centre): 63mm Mounting Hole (centre-cent... More Details

Sprocket Set - Rear 428-46T, Front 428-14T. JH125 Rear Sprocket: Outside Diameter: 190mm Centre Hole Diameter: 58.1mm Mounting Hole (centre-centre): 62mm Mounting Hole (centre-cent... More Details

Stabilizer bar sleeve. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well a... More Details

Starter commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in the Chironex Komodo 100... More Details

Starter (aka starter motor / starting motor) commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popu... More Details

This starter is commonly (but not exclusively) used for 125cc & 150cc GY6 style engines and clones. Mounting hole distance of approximately 7.8cm from center hole to center hole. Clockwise rotat... More Details

Starter 200cc, 250cc engine. Works on almost all 200cc-250cc Chinese engines 11 Teeth. Body of starter is 10cm long with a diameter of 6.5cm. Bolt mount holes have a spacing of 5.3cm center to center.... More Details

Starter 200cc, 250cc and some 400cc engines. Applies to almost all 200cc to 250cc Chinese engines with 9 Teeth (alternative is 11 teeth) and is most recently famous for its use on Baja Wilderness 4x4 ... More Details

Starter motor / Stater assembly. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. Common format for many mach... More Details

This starter motor assembly is typically found in the Starting Motor / Starter section of several part manuals. Commonly used for but not limited to 4-stroke liquid cooled RS19589 / 260cc, 300cc, a... More Details

Starter motor assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV, Feishen... More Details

This bottom mount / lower mount starter applies to (and is not limited to) 50cc - 125cc engines. Most commonly used for automatic and semi-auto 90cc and 110cc ATV engines. This model has 12 teeth and ... More Details

This top mount / upper mount starter applies to (and is not limited to) 50cc - 150cc engines. Most commonly used for automatic and semi-auto 50cc, 70cc, 90cc, 110cc and 125cc ATV engines. This model h... More Details

This performance starter fits all 50cc GY6 style engines and clones. Mounting hole distance of approximately 7cm from center hole to center hole. Counter clockwise rotation with 10 splines. ** INCL... More Details

Arctic Cat ATV/Kymco Starter Motor, GY6-50/80. DVX/Youth 50/90. Counter clockwise rotation with 10 splines. Application: GY6 50/80 Number of Mount Holes: 2 Number of Splines: 10 Rotation:... More Details

Starter Motor, Attila 125. Baja Motorsports/Go Scoot/Jetmoto/Maxam. Clockwise rotation with 9 splines. Number of Splines: 9 Rotation: Clockwise ... More Details

This starter motor with 9 splines is typically found in the Starter Motor / Starting Motor section of several part manuals. Commonly used for but not limited to 125cc and 150cc engines. It is most p... More Details