Buffering collar bushings, rear wheel. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popular... More Details

Bushing (4pcs) and bolt (4pcs) set. Total 8pcs. The inside diameter is for a M10 bolt, which is the size included Approximate dimensions: 34mm, outer diameter (OD) M10, inner diameter (ID) ... More Details

Bushing (4pcs) and bolt (4pcs) set. Total 8pcs. The inside diameter is for a M10 bolt, which is included Approximate dimensions: 24mm, outer diameter (OD) M10mm, inner diameter (ID) 20mm... More Details

Nylon bushing. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. These machines are commo... More Details

Nylon swing arm bushing. This bushing profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for UTVs in the 300cc to 1000cc range. ... More Details

Bushing, most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands and similar displacement ... More Details

U Type rubber bushing for rear anti-roll bar. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machin... More Details

U Type rubber bushing for rear anti-roll bar. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machin... More Details

2-pin Hitpoint brand buzzer, part number PF-27N29EPQ. ... More Details

Main Cable Assembly for EFI (Electronic Fuel Injected) ATVs. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clo... More Details

Cable Assembly for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as ... More Details

Main cable assembly. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and si... More Details

Main cable assembly. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines... More Details

EFI cable assembly. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines ... More Details

Brake Caliper - Commonly used for (but not limited to) many variations of ATVs. ... More Details

This cam is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. Associated compression spring (291.15.2-3) and Drive Pulley (291.15.2... More Details

This camshaft / cam shaft assembly is most commonly used for (and not limited to) 125cc manual shift dirt bike engines. ... More Details

Camshaft / Cam shaft for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 2.4.01.1070 (and in some instances 2.4.01.1060). Applies primarily to... More Details

32 tooth camshaft sprocket primarily (though not exclusively) associated with 50cc, 70cc, 90cc, 110cc and 125cc engines, three bolt mount. Approximate dimensions: Outside Diameter: 67.2mm Ce... More Details

33 tooth camshaft sprocket primarily (though not exclusively) associated with 50cc, 70cc, 90cc, 110cc and 125cc engines, three bolt mount. Approximate dimensions: Outside Diameter: 62.4mm Ce... More Details

This 36 tooth camshaft gear applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a ... More Details

Cap Nut - 6mm, includes 2 pieces ... More Details

Cap Nut - 7mm, includes 2 pieces ... More Details

Capacitor, for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 5.3.01.0210. Applies primarily to (but not limited to) Buyang 300cc FA-H300, Gi... More Details

This carburetor profile is most commonly (though not exclusively) used on PW50 Yamaha Pewee 50 models. 12mm intake diameter. Often referred to as 'PZ12J' carburetor type. ... More Details

12mm carburetor. Commonly applies to Yamaha TTR 50 dirt bikes as well as other similar profiles and machines. ... More Details

This carburetor includes a high tolerance 15mm carburetor, cylinder, intake, both gaskets and two fastening bolts. It is most commonly used for (and not limited to) 2-stroke pocket bikes, mini dirt bi... More Details

This 15mm Carburetor with Manual Choke is most commonly used for (and not limited to) 2-stroke pocket bikes, mini dirt bikes and mini quads (ATVs). Also used for some 49cc 2-stroke scooters and smalle... More Details

This performance carburetor kit includes the high tolerance 15mm carburetor, intake, and paper gasket. It is most commonly used for (and not limited to) 2-stroke pocket bikes, mini dirt bikes and mini... More Details

This performance 15mm Carburetor is most commonly used for (and not limited to) 2-stroke water liquid cooled pocket bikes, mini dirt bikes and mini quads (ATVs). Also used for some 49cc 2-stroke scoot... More Details

This performance 15mm Carburetor and Intake kit is most commonly used for (and not limited to) 2-stroke water liquid cooled pocket bikes, mini dirt bikes and mini quads (ATVs). Also used for some 49cc... More Details

16mm 49cc to 125cc carburetors most commonly used for (and not limited to) smaller 4-stroke dirt bikes and mini quads (ATVs). Commonly used as original and replacement carburetor on Tao Tao 110cc ATV... More Details

16mm 49cc to 125cc carburetors most commonly used for (and not limited to) 2-stroke pocket bikes, 4-stroke mini-choppers, mini dirt bikes and mini quads (ATVs). Also used for various other 49cc 2-stro... More Details

This 16mm carburetor is most commonly used for (but not limited to) the Suzuki LT50. This carb has a 16mm manifold opening and a 15mm breather opening. Manifold Inner Diameter: 16.6mm Breathe... More Details

Electric choke 18mm Carburetor commonly used for (and not limited to) 50-250cc engines. Commonly used for other smaller 4-stroke 50cc, 70cc, 90cc, 110cc and 125cc ATVs and go karts / buggies as well ... More Details

Electric choke 18mm Carburetor most commonly used for (and not limited to) 50cc GY6 style engines. Also used for some 2-stroke 49cc, 4-stroke 49cc, 50cc, 70cc and 90cc scooters (direct replacement car... More Details

This 19mm/32mm carburetor with manual choke lever and side facing fuel overflow (for front facing overflow refer to part number 80A2191) is most commonly used for (but not limited to) 50cc 70cc 90cc 1... More Details

This 19mm/32mm carburetor with manual choke lever and side facing fuel overflow (for front facing overflow refer to part number 80A2196) is most commonly used for (but not limited to) 50cc 70cc 90cc 1... More Details

This 19mm/32mm carburetor with manual choke lever and front facing fuel overflow (for side facing overflow refer to part number 80A2196) is most commonly used for (but not limited to) 50cc 70cc 90cc 1... More Details

This 19mm/32mm carburetor with manual choke lever and front facing fuel overflow (for side facing overflow refer to part number 80A2190) is most commonly used for (but not limited to) 50cc 70cc 90cc 1... More Details

Electric choke 19mm Carburetor most commonly (though not exclusively) used for 50cc to 150cc displacement engines. Commonly used on a wide variety of ATVs, dirt bikes, go karts / buggies and scooters... More Details

This performance carburetor includes the high tolerance 19mm carburetor, intake and gasket. It is most commonly used for (and not limited to) 2-stroke pocket bikes, mini dirt bikes and mini quads (ATV... More Details

This 19mm / 32mm carburetor with remote choke attachment is most commonly used for (but not limited to) 50cc 70cc 90cc 110cc 125cc and 140cc ATVs and dirt bikes. Commonly called "PZ19". Also applies t... More Details

This 19mm / 22mm carburetor is most commonly used for (but not limited to) the Yamaha PW80. This carb has a 19mm manifold opening, 25mm breather opening and 48mm center to center bolt mount. G80T-F05... More Details

20mm, 49cc to 125cc carburetors most commonly used for (and not limited to) small 4-stroke dirt bikes and quads (ATVs). Also used for various 49cc 2-stroke as well as other 50cc to 125cc 4 stroke mach... More Details

20mm 49cc to 125cc carburetors most commonly used for (and not limited to) small 4-stroke dirt bikes and quads (ATVs). Also used for various other 49cc 2-stroke as well as 50cc to 125cc 4 stroke machi... More Details

This 22mm/37mm carburetor with manual choke lever is most commonly used for (but not limited to) 90cc 110cc 125cc and 140cc dirt bikes. Commonly called "PZ22". Also applies to other models of 50cc and... More Details

This 24mm/38mm electric choke carburetor (2 pin plug) is typically found in the Carburetor Assy / Carburetor section of many different part manuals. Commonly referred to as variations of model names... More Details

This 25mm carburetor with manual choke attachment is most commonly used for (but not limited to) 125cc to 250cc ATVs and dirt bikes. Also very commonly used for many models of golf carts and other mod... More Details

This 25mm carburetor with remote choke attachment is most commonly used for (but not limited to) 125cc to 250cc ATVs and dirt bikes for popular brands such as Tao Tao. Also very commonly used for many... More Details

Original Mikuni 25mm manual choke carburetor. Most commonly (though not exclusively) used for 125cc, 140cc, 150cc, 155cc, 160cc dirt bikes / pit bikes as well as common big brand models such as the XR... More Details

This 26mm carburetor with manual choke lever is most commonly used for (but not limited to) 125cc to 250cc ATVs, dirt bikes, golf carts, go karts / buggies and scooters. Often referred to as a PZ26 ca... More Details

This Molkt brand performance 26mm carburetor with manual choke lever is most commonly used for (but not limited to) 110cc to 300cc ATVs and dirt bikes. By volume this part is most commonly used for 11... More Details

This 26mm carburetor with manual choke lever is most commonly used for (but not limited to) the Suzuki EN 125 series and similar clones. This carb is applicable for many big brand and Chinese/Taiwane... More Details

This 26mm carburetor with manual choke lever is most commonly used for (but not limited to) the Yamaha YBR 125 series and similar clones. This carb is applicable for many big brand and Chinese/Taiwan... More Details

This 26mm carburetor with remote choke attachment is most commonly used for (but not limited to) 125cc to 250cc ATVs and dirt bikes. Also very commonly used for many models of golf carts and other mod... More Details

This 26.4mm carburetor is often referred to as 26mm but sometimes also as 27mm. Manual choke profile is most commonly used for (but not limited to) 125cc, 150cc, 200cc and 250cc ATVs and dirt bikes. ... More Details

Carburetor 27mm manual choke, includes primer to help with cold starts and starting under high moisture conditions. This carb has a 35mm breather opening and the mounting holes are 48mm apart center ... More Details

This 27mm carburetor with remote choke attachment is most commonly used for (but not limited to) 125cc 150cc, 200cc and 250cc ATVs and dirt bikes. Also very commonly used for many models of golf carts... More Details

Carburetor 27mm/35mm cable choke, includes primer to help with cold starts and starting under high moisture conditions. Manifold Inner Diameter: 26.9mm Breather Inner Diameter: 34.3mm Brea... More Details

34mm/45mm Carburetor. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. Common format for many machines in the... More Details

This 30mm carburetor with manual choke lever is most commonly used for (but not limited to) 125cc 150cc, 200cc and 250cc ATVs and dirt bikes. Commonly called "PZ30" or "CG200". Also very commonly used... More Details

Carburetor 30mm manual choke, includes primer to help with cold starts and starting under high moisture conditions. This carb has a 42mm breather opening and the mounting holes are 48mm apart center ... More Details

This 30mm/40mm carburetor with remote choke attachment is most commonly used for (but not limited to) 125cc 150cc, 200cc and 250cc ATVs and dirt bikes. Also very commonly used for many models of golf ... More Details

Carburetor 30mm cable choke, includes primer to help with cold starts and starting under high moisture conditions. This carb has a 42mm breather opening and the mounting holes are 48mm apart center t... More Details

Carburetor - 32mm, Electric Choke. PD32J-2 carburetor profile is most commonly (though not exclusively) used on Honda FourTrax 2x4 and 4x4 editions, 1988 to 2000 primarily, ATC250, TRX250, TRX300, TR... More Details

33mm Carburetor. This carb has a 33mm manifold opening and 48mm breather opening. Made in Japan by Mikuni. Commonly used for (but not limited to) 500cc engines, such as the Hisun 500cc 4x4 ATVs, as we... More Details

34mm/45mm electric choke carburetor. Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement mach... More Details

36mm Carburetor commonly used for a wide range of displacement in the 300cc, 400cc, 500cc, 600cc, 700cc, and 800cc range. This carb has a 36mm manifold opening and 55mm breather opening. Very commonl... More Details

42mm Carburetor. This carb has a 42mm manifold opening and 58mm breather opening. Made in Japan by Mikuni. Commonly used for (but not limited to) 700cc engines, such as the Hisun 700cc 4x4 ATVs, as we... More Details

49cc carburetors most commonly used for (and not limited to) 2-stroke pocket bikes, mini dirt bikes and mini quads (ATVs). Also used for some 49cc 2-stroke scooters and smaller buggies/go-karts. This... More Details

49cc carburetors most commonly used for (and not limited to) 2-stroke pocket bikes, mini dirt bikes and mini quads (ATVs). Also used for some 49cc 2-stroke scooters and smaller buggies/go-karts. This... More Details

This electric choke carburetor is typically found in the Carburetor / Air Cleaner section of several part manuals. Commonly used for but not limited to GY6 / 300cc, and 330 engines. It is most popula... More Details

31mm/47mm electric choke carburetor. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. Common format for many ... More Details

This 30mm / 44mm electric choke carburetor is most commonly used for (and not limited to) GY6 format engines, XY and CF brands most famously, primarily 250cc ATVs, scooters / mopeds and to a lesser de... More Details

This 12mm carburetor is a direct replacement for the Honda style 1.6HP (GX35) motor which has thousands of applications in the global market. One of the most commonly used engine types worldwide. Ca... More Details

This 23mm carburetor is a direct replacement for the Honda style 11HP (GX340) motor which has thousands of applications in the global market. One of the most commonly used engine types worldwide. ... More Details

This 27mm carburetor is a direct replacement for the Honda style 13HP (GX390) motor which has thousands of applications in the global market. One of the most commonly used engine types worldwide. Ca... More Details

This 15mm carburetor is typically found in the Carburetor section of several part manuals. Commonly used for but not limited to 152F (1kw generator), Honda 1.6HP GX100, and some EU1000 engines with ... More Details

This 16mm carburetor is a direct replacement for the Honda style 4.0HP (GX120) motor which has thousands of applications in the global market. One of the most commonly used engine types worldwide. Ca... More Details

This 18mm carburetor is typically found in the Carburetor (3) section of several part manuals. Commonly used for but not limited to Honda 5.5HP GX160 motor with BE65B carburetors, Lifan 168F / 170F,... More Details

This 18mm carburetor is a direct replacement for the Honda profile 5.5HP (GX160) motor which has thousands of applications in the global market. One of the most commonly used engine types worldwide. ... More Details

This 19mm carburetor is a direct replacement for the Honda profile 6.5HP (GX200) motor which has thousands of applications in the global market. One of the most commonly used engine types worldwide. ... More Details

This 19mm carburetor is a direct replacement for the Honda profile 6.5HP (GX200) motor which has thousands of applications in the global market. One of the most commonly used engine types worldwide. ... More Details

This 20mm carburetor is a direct replacement for the Honda style 8.0HP (GX240) style motor which has thousands of applications in the global market. One of the most commonly used engine types worldwi... More Details

This 21mm carburetor is a direct replacement for the Honda style 9.0HP (GX270) motor which has thousands of applications in the global market. One of the most commonly used engine types worldwide. C... More Details

Original Keihin carburetor (replaces Mikuni model VM34-168), manual choke, 34mm profile. Used for a wide variety of engine sizes and machine types. Manifold Inner Diameter: 33.8mm/in Breather I... More Details

Original Mikuni model VM22 carburetor, manual choke, 26mm profile. Commonly (though not exclusively) used for 50cc, 70cc, 90cc, 110cc, 125cc, 140cc, 150cc, 155cc, 160cc dirt bikes / pit bikes, ATVs, ... More Details

Original Mikuni model VM22 carburetor, manual choke, 26mm profile. Commonly (though not exclusively) used for 50cc, 70cc, 90cc, 110cc, 125cc, 140cc, 150cc, 155cc, 160cc dirt bikes / pit bikes, ATVs, ... More Details

Set includes 1pc original Mikuni model VM22 carburetor (manual choke, 26mm profile), 1pc engine manifold intake attachment, 1pc manifold gasket and 6pcs of mounting hardware. Carburetor manifold openi... More Details

Original Mikuni model VM24 carburetor, manual choke, 28mm profile. Used for a wide variety of engine sizes and machine types. Most famous for their use as stock carburetors on Honda CRF, Kawasaki KLX... More Details

Original Mikuni model VM30 carburetor, manual choke, 30mm profile. Used for a wide variety of engine sizes and machine types. Manifold Inner Diameter: 30.9mm/in Breather Inner Diameter: 46.14mm/i... More Details

This carburetor applies to (and is not limited to) Suzuki LT 80 models. Manufacturer Part Numbers and Product Codes (not limited to this list): 13200-40B00 13200-40B10 Common applicati... More Details

Performance Carburetor Jets Kit fits (and is not limited to) 47cc engines. Four sizes: 60/65/70/75, for M4 carbs, size printed on each jet. ... More Details

Performance Carburetor Jets Kit fits many 2-stroke and 4-stroke machines. Five sizes: 65/70/75/80/85, for M5 carbs, size printed on each jet. ... More Details

Performance Carburetor Jets Kit fits many 2-stroke and 4-stroke machines. Four sizes: 70/75/80/85, for liquid water cooled M6 carbs, size printed on each jet. ... More Details

This carburetor repair kit is for 16mm carburetors. It includes all the necessary gaskets, rings, springs, needles, clip and float that you need to give your carb a complete tune up. ... More Details

This carburetor repair kit is for 19mm carburetors. It includes all the necessary gaskets, rings, springs, needles, clip and float that you need to give your carb a complete tune up. ... More Details