Browse our stock of intake manifolds specifically designed for 50cc, 110cc, 125cc, and 250cc ATV engines. Enhance the performance and efficiency of your ATV engine with our high-quality intake manifold options. Whether you need a replacement part or want to upgrade your intake system, we have the solutions you need. Explore our inventory now and find the perfect intake manifold for your ATV engine. Shop with confidence and experience improved engine performance and power with our reliable intake manifolds.
View All Intakes / Manifolds
Air Intake Screen - XY1100, Chironex 1000cc, 1100cc - 60A4095 - PBC2827F1
Intakes / Manifolds
$29.39
Air intake screen, commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in the Chiron...
This intake manifold is most commonly (but most exclusively) used for GY6 125cc and 150cc Engines. This engine is most commonly used for 150cc gas scooters, ATVs and buggies / go karts. ...
This 15mm plastic intake manifold set is designed to fit almost any 2-stroke ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. Also used for some 2-stroke scooters and smaller buggies/go-karts....
This 15mm aluminum intake manifold is designed for performance and fits almost any 2-stroke air cooled ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. Also used for some 2-stroke scooters and...
This 15mm aluminum intake manifold & gasket set is designed for performance and fits almost any 2-stroke air cooled ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. Also used for some 2-st...
This 15mm aluminum intake manifold & gasket set is designed for performance and fits almost any 2-stroke ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. Also used for some 2-stroke scoote...
On Back Order
Reserve it now. |
This 15mm plastic intake manifold set is designed to fit almost any 2-stroke ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. Also used for some 2-stroke scooters and smaller buggies/go-karts....
Intake - 18mm, Manifold Velocity Stack, Pocket Bike - 20P9165 - PBC2826F1
Intakes / Manifolds
$17.63
Air Filter Seat, intake manifold aka Velocity Stack - Pocket Bike. Aluminum. Outside diameter of 45mm, 18mm centre hole and the mounting holes are 30mm apart centre to centre. ...
This intake manifold is most commonly (but most exclusively) used for GY6 50cc Engines. This engine is most commonly used for 50cc gas scooters, as well as smaller dirt bikes, ATVs and buggies / go k...
This intake manifold is designed to work with 19mm carburetors in 4-stroke machines. It will fit many 50cc to 110cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with a PZ19 ...
This intake manifold is designed to work with 19mm carburetors in 4-stroke machines. It will fit many 50cc to 110cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with a PZ19 ...
Intake - 22 mm Standard Configuration. Opening is 22.1mm, the mounting holes are 4.8mm and 4.5mm apart centre to centre respectively. ...
This intake manifold is designed to work with 19mm carburetors in 4-stroke machines. It will fit many 50cc to 110cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with a PZ19 ...
This intake manifold is designed to work with 19mm carburetors in 4-stroke machines. It will fit many 50cc to 110cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with a PZ19 ...
This intake manifold is designed to work with 19mm to 22mm carburetors in 4-stroke machines. It will fit many 50cc to 125cc engines in ATVs, Dirt Bikes, or Scooters. Commonly used in conjunction with ...
Intake pipe. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. Common format for many machines in the 250cc-40...
This intake manifold is designed to work with 19mm to 25mm carburetors in 4 stroke machines. It will fit many 50cc to 150cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with...
Intake manifold, 25mm. Most commonly (though not exclusively) used for 50cc, 70cc, 90cc, 110cc, 125cc and 150cc ATVs, dirt bikes, go karts / buggies, scooters and other motorized products with 19mm t...
Intake - 26mm, Velocity Stack, Manifold Pipe, 2 Stroke, 33cc to 50cc - 20P9160 - PBC2829F1
Intakes / Manifolds
$9.79
Intake Manifold Pipe aka Velocity stack for 2 stroke 33cc-50cc Pocket Bike & Gas Scooter. Plastic. Total outside diameter is 53mm, 26mm centre hole and the mounting holes are 39mm apart centre to...
This intake manifold is designed to work with 30mm carburetors in 4-stroke machines. It will fit many 200cc to 250cc engines in ATVs, Dirt Bikes, and Scooters. Fits precisely with a PZ30 carb. Openin...
Intake CB125 configuration. Opening is 27.1mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center ...
Intake CG125 Configuration. Opening is 27.3mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center ...
This Intake Manifold is 27mm and applies to (but is not limited to) 27mm carburetors. Opening is 27.7mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center ...
Intake JH125 Configuration. Opening is 27.3mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center. ...
Intake CG150 Configuration. Opening is 28.2mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center
...
This intake manifold is most commonly (but most exclusively) used for GY6 Engines, most commonly for CF Moto and similar brand machines. This engine is most commonly used gas scooters, as well as dir...
This intake manifold is designed to work with 26mm to 27mm carburetors in 4-stroke machines. It will fit many 125cc to 200cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction wit...
This intake manifold is designed to work with 30mm carburetors in 4-stroke machines. It will fit many 200-250cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with a PZ30 carb...
This intake manifold is designed to work with 30mm carburetors in 4-stroke machines. It will fit many 200-250cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with a PZ30 carb...
Intake CG200 Configuration. Opening is 30mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center
...
This intake manifold is most commonly (but most exclusively) used for the Jianshe 400cc JS400 ATV. Corresponding O-ring (F3-700601-0) is our part number 20A5772.
Product Specifications:
Mani...
Intake - 34mm, CF Moto, Hammerhead, Chironex, CF188, 500cc, ATV, UTV Spartan 500cc - PBC20739FF1
Intakes / Manifolds
$26.45
This intake manifold (aka joint carburetor) is typically found in Cylinder Head or Cylinder Head Sub Assembly section of several part manuals. Commonly used for but not limited to CF188 / 500cc engine...
On Back Order
Reserve it now. |
Inlet pipe joint. Commonly used for (but not limited to) 400cc and 500cc engines, such as the Hisun 500cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement...
On Back Order
Reserve it now. |
Intake - Yamaha PW50 ...
